22
M
ain
O
pe
ra
ti
on
3
Reverb
Reverb adds reverberation to the sound, simulating the acoustic environment of a recital room, stage, or concert
hall. The MP11SE features 6 high quality types of reverb.
Each sound section features independent REVERB ON/OFF and REVERB DEPTH controls, however the REVERB TYPE
(and associated settings) is common to all sections.
Reverb types
Reverb type
Description
Room
Simulates the ambiance of a small rehearsal room.
Lounge
Simulates the ambience of a piano lounge.
Small Hall
Simulates the ambiance of a small hall.
Concert Hall
Simulates the ambiance of a concert hall or theater.
Live Hall
Simulates the ambiance of a live hall or stage.
Cathedral
Simulates the ambiance of a large cathedral.
Turning reverb ON or OFF
Press the desired sound section’s REVERB button to turn the
reverb for that section ON or OFF.
The LED indicator for the sound section’s REVERB button will
turn ON or OFF to indicate the current status of the reverb.
Changing the reverb type and additional parameters
Press and hold the section’s REVERB button.
The REVERB page of the EDIT menu will be shown in the LCD
display.
Common
parameters:
Turn the four control knobs (A, B, C, D) to change the reverb type
and adjust additional reverb parameters.
Press and hold the REVERB button again to exit.
Reverb parameters
Knob Parameter
Description
Value range
A
Type
Changes the type of environment.
(see table above)
B
PreDelay
Adjusts the delay time before the reverberation is applied.
0 ~ 200 ms
C
Time
Adjusts the decay length/speed of the reverberation.
300 ms ~ 10.0 s
(depending on type)
D
Depth
Adjusts the depth of the environment (amount of reverberation).
0 ~ 127
LED indicator ON:
Reverb is turned ON
hol
d
Time
Type
Depth
PreDelay
Overview of Internal Sections
