Page
81
9
Appendix
5.
Securing the piano to the stand.
(1) Place the L-shaped bracket as shown in the diagram, and use screws A
(M4 x 35) to fasten the bracket to the piano and the stand.
(2) Use screws B (M4 x 16) to fasten the bracket to the piano.
9.
Connecting the power cord
(1) Connect the power cord to the piano.
(2) Use the cord clamp to secure the power cord screw C (M4 x 12).
8.
Adjusting the pedal support
Turn the pedal support (E) at the bottom of the stand until it reaches the
fl oor.
7.
Attaching the end panels.
(1) Fit the rung of the end panel into the depression on the side of the
stand.
(2) Insert the front attachment on the end panel into the channel on the
side of the piano.
(3) Fasten the end panel, and then press hard where hook and loop
fasteners are used.
6.
Attaching the back panel
(1) Place the pedal cord and speaker cord in the gap between the piano
and the stand.
(2) Fasten the back panel with two screws B (M4 x 16).
Important point:
· Make sure that the front attachment of the end panel overlaps the front
surface of the stand.
Important point:
· Place the L-shaped bracket in the depression on the side of the stand,
and align the holes.
Attaching the headphone hook
Using two screws with a shar p
end (M4 x 14) that come with the
headphone hook, you can attach
the headphone hook beside the
headphone jack.
* This step is optional. If you do
not need the hook, keep it with
the instruction manual.
10.
Attaching the score stand.
11.
Remove the protective plastic fi lm on the display.
Screws with a fl at end
B. M4 x 16
Screws with a fl at end
A. M4 x 35
Place the L-shaped
bracket in this depres-
sion.
L-shaped
bracket
Screws with a fl at end
B. M4 x 16
Channel on the side of
the piano
Depression on the side of the stand
Front attachment on the end panel
Screw with a sharp end
C. 4 x 12
Power cord
Sound board
Score stand
Display
Headphone
jack
Headphone
hook
Screws for
attaching the
headphone
hook
Assembly is now complete
Caution
x
Make sure that all the screws have been properly
tightened.
Caution
x
Use the screws provided in order to securely fasten
the piano to the stand. Failure to do so may result
in the piano falling off from the stand, causing great
danger.
x
Do not force the screws in. Insert them straight into
the hole without excessive force and tighten them
there.
x
Lightly tighten the screws by hand fi rst to make sure
that they are threaded correctly.
Caution
x
The pedal stand may be damaged if the pedals are
used when the pedal support is not touching the
fl oor. Make sure that the pedal support is touching
the fl oor.
x
Once the pedal suppor t touches the floor, stop
turning it. Failure to do so may result in damage to
the stand.
x
When you move the unit, remove the pedal support
before moving. Readjust the pedal support after
moving is complete.
Caution
x
Use the cord clamp to secure the power cord so that
the cord will not touch the sound board. Noises may
be generated if the power cord touches the sound
board.
Caution
<When moving the unit>
x
When you move the unit, make sure to remove the
end panels and the pedal support before moving.
x
Do not drag the unit.
x
When you remove the piano from the stand, first
disconnect the pedal cord, speaker cord, and power
cord.
<Sound board at the back of the stand>
x
Natural wood is used on the surface of the sound
board, and its color may be therefore different from
the artifi cial panel color.
Summary of Contents for Digital Piano CA91
Page 89: ......