67
Set
tings
6
Line In Level
(CA95 only)
The Line In Level setting allows the volume level of the CA95’s Line In input jacks to be adjusted. This setting may
be useful when using the USB Recorder function and attempting to balance an external audio source with the
instrument’s sound.
* The Line In Level can also be adjusted by using the LEVEL knob, located on the jack panel. Please refer to page 123 for more information.
1. Selecting the Line In Level setting
After entering the Basic Settings menu (page 60):
Press the
d
or
c
buttons to select the Line In Level setting.
2. Adjusting the Line In Level value
Press the
e
or
f
buttons to increase or decrease the value of
the Line In Level setting.
* The Line In Level can be adjusted within the range of –10 dB - +10 dB.
* To reset the Line In Level setting to the default value, press the
FUNCTION button (RESET).
* Any changes made to the Line In Level setting will remain until the
power is turned off.
* Preferred Line In Level settings can be stored to a Registration memory
for convenient recall. Please refer to page 30 for more information.
3. Exiting the Line In Level setting
Press the FUNCTION button (BACK) to exit the Line In Level
setting and return to the Function Menus screen.
