Kawai Concert Artist CA95 Owner'S Manual Download Page 124

Page: 124 / 136

124

Troubleshooting

The tables below summarise issues that may be experienced with the CA95/CA65 digital piano, explaining the

typical cause(s), and recommended solution(s).

Power

Issue

Possible Cause and Solution

Page no.

The instrument does not turn on.

Check that the power cable is firmly attached to the instrument, and

connected to an AC outlet.

p. 14

The instrument turns itself off after a period
of inactivity.

Check that the ‘Auto Power Off’ function is not enabled.

p. 117

Sound

Issue

Possible Cause and Solution

Page no.

The instrument is turned on, however no sound

is produced when the keys are pressed.

Check that the MASTER VOLUME slider is not set to the lowest position.

p. 15

Check that a pair of headphones (or headphone adaptor plug) are not

connected to the PHONES jacks.

p. 15

Check that the ‘Local Control’ setting in the MIDI Settings menu is set to On.

p. 101

The sound distorts when playing at very loud

volume levels.

Check that the MASTER VOLUME slider is set to an appropriate level,

reducing the volume if excessive distortion is heard.

If connecting the instrument to an amplifier/mixer using the Line Out jacks,

reduce the value of the ‘Line Out Volume’ setting in the Basic Settings

p. 15

Strange sounds or noises are heard when

playing with piano sounds.

The CA95/CA65 digital piano attempts to reproduce the rich variety of tones

created by an acoustic grand piano as accurately as possible. This includes

string resonances and damper noises, and other subtle characteristics that

contribute to the overall piano playing experience.

While these additional tones are intended to enhance the realism of the

instrument, it is possible to reduce their prominence, or disable the effects

altogether using the settings in the Virtual Technician menu.

p. 76

The top 18 notes of the keyboard sustain for

longer than neighbouring notes, even when the

damper pedal is not pressed.

This is the correct behaviour, and intended to reproduce the undamped

notes (typically the top two octaves) of an acoustic grand piano.

–

Pedals

Issue

Possible Cause and Solution

Page no.

The pedals are unreliable or do not function
at all.

Check that the pedal cable is firmly connected to the instrument

(CA65 only).

p. 118

When depressing a pedal, the pedal board
flexes and is not firm.

Check that the pedal support bolt is fully extended.

p. 121

Summary of Contents for Concert Artist CA95








































































































































Search results

Summary of Contents for Concert Artist CA95

Reviews:

Brands by name

Popular brands

Kawai Concert Artist CA95, Owner'S Manual

Search results

Summary of Contents for Concert Artist CA95

Reviews:

Brands by name

Popular brands