10
Appendix
Page
82
CA61 stand assembly instructions
Thank you for purchasing a KAWAI Concert Artist digital piano.
First, read this instruction manual and make sure that all the parts are included, and assemble the unit while being careful not to scratch or damage the
stand. (Follow the procedures in reverse order when disassembling the unit.)
Assembly sequence
1.
Remove the stand from the box.
Insert the pedal support (C) about 1 cm into the bottom of the stand.
2.
Attaching the piano
(1) Place the piano on the front half of the stand (so that the metal bracket
holes are seen when viewed from the top) (the piano hooks will be
placed between the two side panel brackets).
(2) While supporting the piano, slide the piano towards the back to engage
the hooks on the piano with the metal brackets on the side panels.
(3) Press both the side panels against the piano, and tighten the temporarily-
tightened screws B (M4 x 16) on the back panel.
(4) Fasten the piano with screws A with a fl at end (M6 x 25).
3.
Connecting the cables.
While the piano is temporarily placed on the stand, connect the pedal cord
and speaker cord to the piano.
Important points:
· Make sure that the locking tabs are facing the correct direction.
· Insert the connector straight.
Do not apply too much force; it may cause unit failure.
* To pull out the cord, remove the connector while pressing the locking
tab.
Parts (included items)
Assembling screws
Ä
Use a Phillips-head screwdriver (+) to assemble the unit.
Stand
Piano
Score stand
Back panel
Headphone hook
Headphone hook mounting
screw
4 x 14 (x 2)
Power cord
(with a fl at end)
A. M6 x 25 (x 4)
B. M4 x 16(x 2)
[Others]
C. Adjuster (x 1)
Pedal support insert hole
(back of the pedal stand)
Locking tab
Locking tab
Connector
Connector
Speaker cord
Pedal cord
Caution
x
Make sure that more than two
people work on unit assembly.
Screws with a
fl at end
A. M6 x 25
Hook provided on
the piano
(Side view)
Important point:
· Loosely attach the side panels so that the piano can be placed between
them.
· When attaching the piano to the side panels, press the side panels
inward for a tight fi t against the piano.
Caution
x
Make sure that more than two people work on unit
assembly.
x
Make sure that your hands are not caught between
the piano and the stand when you place the piano on
top of the stand.
x
Use the screws provided in order to securely fasten
the piano to the stand. Failure to do so may result
in the piano falling off from the stand, causing great
danger.
x
When the cords are placed in the side panel, make
sure that the cords are not pinched between parts.
x
Do not force the screws in. Insert them straight into
the hole without excessive force and tighten them
securely.
x
Lightly tighten the screws by hand fi rst to make sure
that they are threaded correctly.
CA61̲EN.indd 82
2008/10/17 12:11:48
