– 8 –
Be sure that all parts are included before starting to assemble your unit.
CAUTION!
Be sure to assemble CL30 by two persons and being care for carrying the Main Unit at level.
1. Insert the adjuster into about 1 cm
on the bottom of the Pedal Board.
2. Undo and pull out the Pedal cord on
the back of the Pedal Board.
3. Place the Side Boards beside the Pedal Board
on the floor with its back sides facing down.
Fix the screws (a) (b) sliding into the metal
fittings on the both sides of the Pedal Board.
4. Fasten Side Panel and Back Panel with
two screws(c) tightly.
5. Fasten screws (a) (b) and then screw (f)
tightly.
6. Raise up the assembled Stand.
Adjuster Hole
(Back of the Pedal board)
Front
Back
Side Panel
( B )
Screws( f )
ø 4 x 16
Pedal Board
( D )
Screws( c )
M6 x 65
Back Panel
( C )
Adjuster
( G )
Pedal Board
( D )
Side Panel
( B )
