manualshive.com logo in svg

KaVo SMARTair plus, Instructions For Use Manual

Share
Download
KaVo SMARTair plus Instructions For Use Manual Download Page 44

Exchanging the adsorption filter

▶ Open the filter flap ① with the snap locks ② and fold it back.

▶ Remove the muffler element ③ and full adsorption filter ④.

▶ Insert a new adsorption filter ④.

▶ Close the filter flap ② (make sure it locks in place).

▶ Mount the cover for the SMARTair plus mobile and snap it in place.

▶ Set up the SMARTair plus mobile at the provided location and connect it.

See also: 4.3 Installing the SMARTair plus mobile, Page 26

7.2.5

   

Changing the ultrafine filter of the SMARTair plus

Note
The SMARTair plus may only be operated when the ultrafine filter is inserted.

Note
The ultrafine filter must be changed every two years.

Note
The ultrafine filter also needs to be exchanged when the LED "Filter full" indicates

a malfunction after the filter bag has been changed.

 

 

 

 

 

 

 

 

 

 

Instructions for use SMARTair plus, SMARTair plus mobile
7 Cleaning and servicing | 7.2 Servicing

42/57

Summary of Contents for SMARTair plus





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands