You can now save the suction level.
▶ Turn off the power switch ⑤ or ⑥, and turn it on after two seconds.
The selected suction level is saved.
Deactivate the default suction level
▶ Hold down the "Minus" ⑦ key, and turn the power switch ⑤ or ⑥ on.
The LEDs ① to ④ flash.
▶ Release the "Minus" ⑦ key.
You can now save the suction level.
▶ Turn off the power switch ⑤ or ⑥, and turn it on after two seconds.
The selected suction level is saved.
6.5
Setting the response sensitivity
Prepare the unit
The response sensitivity is set in the "Automatic" position.
▶ Switch the power switch ③ or ④to "On".
▶ Hold down the "Automatic" key ⑤ (for about three seconds), until the LEDs ①
and ② flash.
The unit is now in "Setting mode".
Instructions for use SMARTair plus, SMARTair plus mobile
6 Operation | 6.5 Setting the response sensitivity
35/57
