Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace
6 Operation | 6.5 Setting the response sensitivity
ð
LEDs
①
to
④
flash.
▶
Release the "Plus"
⑥
button.
ð
Saving of the suction levels is now selected.
▶
Switch the power switch off and then on again after 2 seconds.
ð
The selected suction level is saved.
Deactivate the default suction level
▶
Press and hold the "Minus"
⑤
button and switch the power switch on.
ð
LEDs
①
to
④
flash.
▶
Release the "Minus"
⑤
button.
ð
Saving of the suction levels is now deactivated.
▶
Switch the power switch off and then on again after 2 seconds.
ð
No suction level is pre-selected.
6.4.1 Recognition of software version and device
properties
3
2
1
4
5
6
▶
Press the power switch to switch the suction device on.
ð
After two seconds, LEDs
①
to
③
indicate the software version and device
properties.
Number of
flashes
LED 1
LED 2
LED 3
Twice
Software version 2 Device is connec-
ted to 50 Hz
Flow sensor is re-
cognised
(SMARTair Evo)
None
Device is connec-
ted to 60 Hz
No flow sensor is
recognised
(SMARTair Stand-
ard)
6.5 Setting the response sensitivity
Getting the device ready for use
The response sensitivity is set in the "Automatic" position.
35 / 46
