Instructions for use SMARTair Evo, SMARTair Evo mobile, SMARTair Evo FLEXspace
6 Operation | 6.1 Automatic mode
32 / 46
6 Operation
Note
The distance between the item generating the dust (such as a cutter) and the
intake opening may not exceed 50 mm.
6.1 Automatic mode
Note
Automatic mode is recommended for units that have an electrical connection.
I
3
2
1
5
4
Set automatic mode
▶
Set the power switch
①
,
②
or
③
to "ON".
▶
Press the "Automatic" button
④
until the "Automatic" LED
⑤
is on.
ð
In "Automatic" position, the suction device is automatically switched on and
off together with the equipment connected to it.
Switch on and switch off
▶
Switch the equipment on.
ð
Suction device starts-up automatically.
▶
Switch the equipment off.
ð
Suction device continues to run for a few seconds and then switches off
automatically.
See also:
2
Set the sensitivity, Page 000
6.2 Manual mode
Note
Units without an electrical connection (such as turbine systems) must be op-
erated manually.
