4. The model is imported and an orientation graphic displays.
5. Click a mesial tooth on the graphic and on the model.
6. Click a distal tooth on the graphic and on the model.
7. Trim the model if needed.
NOTE
You cannot add scans or use the Erase tool on imported models.
8. Repeat for all of the desired layers.
9.34 Export model
About this task
Follow these instructions to export a model.
Steps
1. Click on a scan layer to select it.
2. Right-click on the scan layer and select Export Model.
3. Navigate to the desired folder on your computer.
You can export as .ply, .stl, or .obj file type.
9 Scanning
Instructions for use
KaVo ProXam iOS 57
