KaVo Poly One, Instructions For Use Manual

Page: 14 / 26

Instructions for use KaVo polymerisation light Poly One
3 Description of the Product | 3.1 Technical Specifications
14 / 26
3.1 Technical Specifications
Light source LED
Sterilisable parts Fibre-optic cable made of glass
Wavelengths 450 - 460 nm
Peak wavelength 457 nm
Curing times 3 curing times: 20, 40 or 60 seconds
Minimum radiation power 800 mW/cm
2
The radiation power was determined
with a spectroradiometer.
Weight of handpiece and fibre-optic
cable
160 g
Operating temperature 42 °C (at an ambient temperature of
20 °C)
Max. power of the LED 5 W
Max. current of the LED 700 mA
Rated power of the LED 3.3 W
Rated current of the LED 530 mA
Mode: intermittent operation
Operating time 1 minute
Pause time 1 minute
Dimensions
Length including fibre-optic cable 200 mm
Diameter 25 mm
Cross-section of the optically active
surface of the fibre-optic cable
0.385 cm
2
(38.5 mm
2
)
Operating environment
WARNING
Inappropriate operating conditions.
Impairment of the electrical safety of the device.
▶ It is essential to comply with the operating conditions specified in the
"Technical Specifications" chapter.
Ambient temperature +10 to +40
o
C
Relative Humidity 30% to 75% non-condensing
Air pressure 700 hPa - 1,060 hPa
Max. altitude for operation up to 3000 m