KaVo MASTERmatic LUX M07 L, Instructions For Use Manual

Page: 12 / 24

Instructions for use MASTERmatic LUX M07 L - 1.009.3610 MASTERmatic LUX M20 L - 1.009.3620 MASTERmatic LUX
M29 L - 1.009.3580
5 Operation | 5.1 Attach the medical device
12 / 24
5 Operation
5.1 Attach the medical device
WARNING
Release of the medical device during treatment.
A medical device that is not properly locked in place can release from the motor cou‐
pling and fall off.
▶ Carefully pull on it before each treatment to ensure that the medical device is se‐
curely locked on the motor coupling.
CAUTION
Removing and attaching the handpiece while the drive motor is rotating.
Damage to the catch.
▶ Never attach or remove the reducing shank while the device is rotating!
▶ Attach medical device to the (LUX) motor coupling and turn it until the latch audi‐
bly snaps into place.
▶ Pull on the medical device to make sure that it is securely affixed to the coupling.
5.2 Remove the medical device
▶ Unlock the medical device from the motor coupling and then pull it off along its
axis.
5.3 Insert the INTRA LUX
CAUTION
Loosening of the medical device during treatment.
If the head is not properly locked in place, it can fall out during treatment.
▶ Do not mount or remove the head while rotating. Before each treatment, check
that the head is firmly seated and that the clamping ring is tight.
▶ Rotate the clamping ring in the direction of the arrow to the stop.
▶ Insert the head to the stop. Make sure that the catches are properly seated.
▶ Rotate the clamping ring in the opposite direction (-> close) and tighten it.
5.4 Remove the INTRA LUX
▶ Rotate the clamping ring in the direction of the arrow to the stop.