manualshive.com logo in svg

KaVo MASTERmatic LUX M07 L - 1.009.3610, Instructions For Use Manual

Share
Download
KaVo MASTERmatic LUX M07 L - 1.009.3610 Instructions For Use Manual Download Page 53

▶ Spray the disinfectant on a cloth, then wipe down the medical device

and allow the disinfectant to act according to the instructions of the

disinfectant manufacturer.

▶ Follow the instructions for use of the disinfectant.

7.3.2 Manual disinfection - internal

The efficacy of manual internal disinfection must be demonstrated by the

manufacturer of the disinfection agent. With KaVo products, use only disin‐

fection agents that have been released by KaVo with respect to the com‐

patibility of materials (e.g. WL-cid / made by ALPRO).

▶ Blow off with compressed air until no water drops are visible.

▶ Immediately after internal disinfection, lubricate the KaVo medical de‐

vice immediately with care agents from the KaVo care system.

 

7 Reprocessing steps in accordance with ISO 17664

53 / 74

Summary of Contents for MASTERmatic LUX M07 L - 1.009.3610













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands