background image

33

   

Product description

L-MOTOR 181 DB INTRAmatic (

Mat. no. 0.535.5060

)

 

 

Product description

19

33.1

   

Purpose – Intended use

Purpose:

The motor is:

▪ an air motor intended to operate/drive a dental handpiece or contra-angle handpiece

▪ only for dental treatment by a dental professional. The product may not be changed or used

for any other purpose since this may be hazardous

▪ a medical device according to relevant national statutory regulations

 

 

 

Product description

20

P

Proper use:

According to these regulations, this medical device may only be used for the described application

by a knowledgeable user. The following must be observed:

▪ the applicable health and safety regulations

▪ the applicable accident prevention regulations

▪ these instructions for use

 

 

Product description

21

According to these regulations, it is the responsibility of the user to:

▪ only use equipment that is operating correctly,

▪ use the equipment for the proper purpose,

▪ protect him or herself, the patient and third parties from danger, and

▪ avoid contamination from the product.

33.2

   

Technical Data

Drive speed

5,000 to 20,000 min

-1

Drive pressure

2.2 to 2.7 bar (32 to 39 psi)

 

 

Product description

22

Summary of Contents for L-MOTOR 181 DB INTRAmatic I


















Reviews: