Instructions for use K-ERGOgrip 4944
6 Maintenance | 6.2 Cleaning
22 / 30
▶ Plug the connection cable ② firmly into the handpiece ① and screw the knob ③
back onto the handpiece ①.
Note
Check the functionality of the handpiece.
6.2 Cleaning
6.2.1 Weekly cleaning of chuck and handpiece section
Removing the chuck
▶ Take hold of the handpiece by the grip sleeve ② insert the clip into the tip ① and
unscrew the tip ① in the direction indicated by the arrow.
▶ Pull the tip ① towards you.
Note
Removing the tip may leave the felt disk loose in the tip or on the rotor. If the felt
disk is on the rotor it must be removed.
▶ Turn the grip sleeve ② and knob ③ in opposite directions as indicated by the ar‐
rows until the chuck opens completely (you will hear a double-click).
▶ Take the tool ① out of the chuck.
