KaVo ESTETICA E50 Life, Short Instructions For Use

Page: 25 / 42

Short instructions for use 8 Operation of the operating light KaVoLUX 540 LED (op‐
tional) 25
Switch on COMPOsave mode
▶ Press the "Dim treatment light" key.
or
▶ Hold your hand in front of the sensor for 2 sec.
ð
The COMPOsave mode switches on.
ð
The COMPOsave mode can be recognised by the yellow light.
▶ Press the "Dim treatment light" key.
or
▶ Hold your hand in front of the sensor for 2 sec.
ð
The treatment light switches back to normal light mode.
Setting the brightness of the dimmer (COMPOsave mode or normal light)
▶ Press and hold down the "operating light dimming" button.
ð
Signal buzzes, brightness changes from dark to bright in stages.
▶ Once the desired brightness is reached, release the "operating light dimming" button.
Switching between COMPOsave mode and dimmed light and normal light
▶ Press and hold down the switch of the foot control and press the "Dim treatment
light" button until you hear the buzzer.
ð
The treatment light switches from COMPOsave mode to dimmed normal light.
▶ Press and hold down the switch of the foot control and press the "Dim treatment
light" button until you hear the buzzer.
ð
The treatment light switches back to COMPOsave mode.
ð
The COMPOsave mode can be recognised by the yellow light.
Setting the colour temperature
▶ Press and hold down the "X-ray viewer" button.
ð
Signal buzzes, colour temperature changes.
▶ Release the button when the desired colour temperature is achieved.