KaVo 3D eXam, Operator'S Manual

Page: 20 / 170

Kavo 3D eXam ® Operators’ Manual
k990400 September 19, 2007
3-2
Emergency Stop Control
EMERGENCY STOP allows the Patient to halt all
X-ray and scanning activities by pressing the button.
The Emergency Stop Control can either be hung
from the head support mechanism or held in the
Patient’s hand as desired.
Patient Alignment Panel
WARNING
Laser beams can cause optical damage. Do not stare into the laser
beam. Instruct the Patient to avoid looking into the beam. The use of
optical instruments such as eyeglasses with large diopter or mirrors,
increase eye hazard with this product.
ALIGNMENT LIGHT - pressing the button turns ON
the laser alignment lights for three seconds.
Press and hold the button for three seconds turns the
laser lights ON permanently, until the button is again
pressed to turn OFF the laser lights.
PATIENT ALIGN allows the Operator to move the
Patient seat up and down to facilitate Patient alignment
with the Chin Rest.
System Status Indicators
The System Status Indicators are located on both the
overhead of the Gantry and the Main Control Panel.
POWER indicator is lit when the Gantry is ON.
READY indicator is lit when the software Acquire
button is pressed to begin the scanning process.
X-RAY ON indicator is lit during the scanning process.
FAULT indicator lights when a system error occurs
(such as an x-ray exposure problem).