Instructions for use MASTERmatic LUX M25 L - 1.009.3630, MASTERmatic LUX M05 L - 1.009.3640
3 Description of the product | 3.1 Intended use
10 / 28
3 Description of the product
The electrical-driven MASTERmatic handpieces are dental handpieces in accord-
ance with 21 CFR § 872.4200 (dental handpieces and accessories) designed for
use by a trained professional in the field of general dentistry only.
The devices are electrically driven handpieces that are reusable and ergonomic-
ally shaped, and are provided with a fiber optic light system. The dental hand-
pieces can be sterilised in a steam steriliser (autoclave). MASTERmatic hand-
pieces equipped with a handpiece connector in accordance with ISO 3964 are
connected to a treatment unit by means of a hose and the electrical motor and
receive the energy for the gear, cooling water and air for conservative dental
treatment as well as the light for illumination of the operation area through cor-
responding output openings. Burs in accordance with ISO 1797-1 must be used
with the MASTERmatic handpieces. Based on the INTRAmatic connection that
meets the ISO 3964 standard, the MASTERmatic handpieces fit with any elec-
trical dental motor which is produced in accordance to this standard. The MAS-
TERmatic handpieces interact with the patient through a rotating bur with the
patient teeth according to the intended use.
MASTERmatic Contra-angle handpiece M05 L (
Mat. no. 1.009.3640
)
MASTERmatic Contra-angle handpiece M25 L (
Mat. no. 1.009.3630
)
3.1 Intended use
Indications for use:
The MASTERmatic LUX M25 L and MASTERmatic LUX M05 L are intended for
the removal of carious material, reduction of hard tooth structure, cavity and
crown preparations, removal of fillings, processing and finishing of tooth prepar-
ations and restorations, and for polishing teeth. They may be used by trained
professionals in general dentistry exclusively.
