manualshive.com logo in svg

Kaval LinkNet LNKA800-A, User Manual

Share
Download
Kaval LinkNet LNKA800-A User Manual Download Page 4

 

LinkNet™  LNKA800 RF MODULES  

!

  USER MANUAL 

DCM000000054

 

 

 

Printed:  01.05.08,16:18 

 

Revision Date:5/8/01 

   4

 

 
 

 

Theory Of Operation 

A LINKNET AMPLIFIER MODULE is a Broad-Band Digitally Controlled Class-A 
Amplifier. The most common LINKNET AMPLIFIER MODULE applications are the 
extension of above ground signals into buildings, tunnels, vehicles or the extension 
of radio coverage patterns into outdoor shaded areas such as deep valleys. 

From an applications standpoint, an LINKNET AMPLIFIER MODULE is very similar 
to a regular two-way radio repeater. On Frequency Radio Repeaters can be 
combined using regular two-way radio multicoupling or duplexing equipment and 
have input and output signal characteristics to those of regular transmitters and 
receivers. The one special consideration in LINKNET AMPLIFIER MODULE 
systems is that of input to output antenna isolation. This must be carefully 
engineered for each installation. 

These Modules are designed for indoor use only and are intended for mounting in a 
standard EIA 19 inch rack. Modular design of LINKNET AMPLIFIER MODULE 
circuitry allows for easy servicing, stocking of spares, adaptability and upgrade 
ability. 

LNKA800 MODULE FAMILY 

MODEL 

TYPE 

FREQUENCY 

LNKA800-A 

Broadband Amplifier 

806-824 MHz 

LNKA800-B 

Broadband Amplifier 

851-869 MHz 

LNKA800-C 

Broadband Amplifier 

824-849 MHz 

LNKA800-D 

Broadband Amplifier 

869-894 MHz 

LNKA800-E 

Broadband Amplifier 

896-902 MHz 

LNKA800-F 

Broadband Amplifier 

928-941 MHz 

 

1 .   L N K A 8 0 0  M O D U L E S

Overview 

Models 

Summary of Contents for LinkNet LNKA800-A













Reviews:

No comments

Brands by name

Popular brands

Load more brands