KATflow 100
4 Operation
(Programmer)
Use cursor keys to select
Setup Wizard
.
Confirm by pressing <
ENTER
>.
If sensors are recognised, the serial number
will be shown. If not recognised or not
connected, they may be selected from a list.
(Screen – where integral screen specified)
Use cursor keys to select
Setup Wizard
.
Confirm by pressing <
ENTER
>.
If sensors are recognised, the serial number
will be shown. If not recognised or not
connected, they may be selected from a list.
Select units of measurement using cursor keys
and pressing <
ENTER
>.
Choose pipe material using cursor keys and
pressing <
ENTER
>.
Enter outside pipe diameter using
alphanumerical keys and confirm by pressing
<
ENTER
>.
Use key <
UP
> as character backspace clear to
correct for data entry errors.
If 0 is entered, an additional screen appears
that allows entering the pipe circumference.
Enter pipe wall thickness using alphanumerical
keys and confirm by pressing <
ENTER
>.
Use key <
UP
> as character backspace clear to
correct for data entry errors.
24
