or the mainboard is not switched on. (Note: please inspect whether the mainboard screen power supply
(5 V/12 V) enters the right output pin; if it is, it will lead to a converter damage.
About an unfamiliar mainboard, a multi-meter should be used to inspect whether the contact pin enters
the screen power supply 5V/12V)
Step 4: It is able to be inserted (its front faces upwards) into the input base of LVDS –VGA only if the
indicator on the shielded wire converter is on.
Step 5: After connection, if the mainboard of TV is normal, the display or external display on converter
will display the image of mainboard of TV.
If there is no image, check if the shielded wire is connected well or if any damage of mainboard.
In case of a blurred image, press the mode conversion button repeatedly to convert to various modes till
the image is normal.
To facilitate the mainboard testing on site, a portable power source is able to be used to supply power to
the converter. It is actually measured that Mi 10400 power (portable power from other brand is able to
be selected) is able to supply power to this converter for 15 hours, fully conforming to testing
requirements
