Description of Input Mode Conversion:
This converter supports complete LVDS formats and supports conversion of various resolution ratio
input (6bit, 8bit, 10bit) into VGA signal (1280*720/60HZ), with favorable compatibility with various
displays. Conversion of LVDS signal formats is realized by pressing the mode button circularly.
Parameter Table of Resolution & Format of Converter:
No.
Resolution
LVDS Format
No.
Resolution
LVDS Format
1
800*600
VASA, JEIDA
8
1280*720
VASA, JEIDA
2
1024*600
VASA, JEIDA
9
1600*900
VASA, JEIDA
3
1280*800
VASA, JEIDA
10
1400*1050
VASA, JEIDA
4
1280*1024
VASA, JEIDA
11
1680*1050
VASA, JEIDA
5
1366*768
VASA, JEIDA
12
1600*1200
VASA, JEIDA
6
1024*768
VASA, JEIDA
13
1920*1200
VASA, JEIDA
7
1440*900
VASA, JEIDA
14
1920*1080
VASA, JEIDA
It is prohibited to insert a shielded wire conversion board into a converter first. Instead, it should be
connected to a TV mainboard directly before switching on the TV mainboard. This operation easily leads
to shielded wire insertion fault and component damage. Please operate it based on the following steps:
1. Do not insert a shielded wire into a converter first. Instead, please insert the original shielded wire
of a TV mainboard into the converter. During insertion, LVDS signal wire sequence should be aligned.
After switching on the TV mainboard, the small board indicator light is on, indicating that the
termination of the shielded wire (wire sequence) is correct. Then insert the converter. It is
prohibited to insert the converter inside if the small indicator light is off; otherwise, the converter
might be damaged caused by the screen power supply entering LVDS input pin.
2. Generally, the single-route LVDS signal is able to be connected 0~3 (connection of group wire 4 is not
necessary) in Group A and clock input by selecting LVDS wire. It is possible to connect 5 pairs of
LVDS wire input. LVDS signal of Group A is able to support the resolution ratio up to 1366*768. LVDS
with two- or four-route is able to be connected to this group only.
3. The LVDS input rule of this converter follows PCB wiring rule of LCD TV produced by Skyworth, which
conforms to standard of LVDS format in the industry of color TV.
4. This converter adopts wide power supply at 5V-12V (1A) and supports portable power source at
5V/1A, so it’s convenient to carry for test.
5. Attention: LVDS input end of this converter should not have the screen power connected to any pin of
the LVDS input end; otherwise, it might damage the main chip of the converter. The main chip damage
incurred by this falls beyond the guarantee scope.
Schematic Diagram of Converter Connection:
