W H E E L B L A N C E R
- 9 -
4.3.2 ALU-S balance mode dimension input method
Do not clamp lead on the outside of the aluminum rim balance (S balance).
1) Manual input of rim data
Press key to select "S" balance mode (corresponding indicator light is on),
please refer to (figure)
A) To change AL value, press A
↑
, A
↓
to change.
B) Change AE value by pressing B
↑
, B
↓
.
C) To change the DL value, press D
↑
, D
↓
to change.
D) To change the DE value, press < FINE > and hold it all the time, and press D
↑
, D
↓
to change.
Note: The default value DE = 0.8dL. When the dL is changed, DE returns to the
default value. When the system calculates the center of gravity of the balance
block and the distance of the balancing machine, it will automatically consider
the balance block according to 14mm.
0 gauge
14mm
(1)