W H E E L B L A N C E R
- 11 -
4.4.2 Special shape rim balancing operation (ALU-S balancing mode)
Press < ALU > key to select "S" balance mode (corresponding indicator light is
on), enter rim data by "S" balance mode, and start the machine for unbalance
calculation. After the machine balance is completed and the unbalance is
displayed:
A. Rotate the tire slowly, and fix the tire when the left position indicating diode is
Static balance static-. Static balance
correction is performed on the tire.
Dynamic Balancing - A balancing block is
sandwiched between both sides of the rim for
steel and aluminum alloy rims.
ALU2- The inner side is clamped with the balance
block, and the outer side is adhered to the balance block
(the position of the outer balance block is shown in the
figure).
ALU1- Balanced aluminum alloy rim,
adhesive balancing block method is
adopted on both sides.