OPERATION
IC120-2 ENG
3-18
IC120-2-C301130
IC120-2-C301140
IC120-2-C301150
CAUTION OF TRAVEL ON A STEEP SLOPE
Do not travel on slopes over 20
in order to
avoid turnover.
On steep slopes over 9
, travel the machine at
low travel speed and middle or lower engine
speed.
Never change the travel direction on steep
slopes or cross such slopes. Such operation
may cause turnover or slip. Move down to a flat
ground once and make a detour. Be sure to
drive safely.
Overruns tend to occur when traveling downhill
in the manual mode.
If an overrun occurs, perform overrun
avoidance operation immediately.
Cautions
Travel in the proper postures shown below.
Drive the machine with the cabin upper side of a slope
when the vessel is empty. This posture ensures stable
driving, since the center of gravity is located on the
cabin side.
Drive the machine with the vessel upper side of a slope
when the vessel is full. This posture ensures stable
driving, since the center of gravity is located on the
vessel side.
When driving over an obstacle, reduce the speed and
drive safely with care not to turn over.
Do not accelerate or decelerate the speed or stop
suddenly.
Never change the travel direction on
or cross a slope.
Make a detour on
a flat ground.
Downhill
Uphill
Operator seat
Traveling on slope with an
unloaded machine
Downhill
Uphill
Traveling on slope with a
loaded machine.
Vessel
(Wrong)