background image

1 / 5

About This Guide

This document is part of the product.

Do not install or use the device until you have read and 
understood this document.

Perform all operating steps described in this manual in 
the specifi ed sequence.

Keep this document for reference throughout the ser-
vice life of the device. Pass this document on to any 
new owner or user.

For the most up-to-date version of this document, go to 

www.kathrein-ds.com

.

Features

High dynamic range of amplifi er units

High decoupling between the amplifi er units

Due to the use of a GaAs fi nal stage, the terrestrial 
amplifi er is suitable for CATV applications

Adjustable attenuators (in 1-dB steps) for the satellite 
range and terrestrial range (the amplifi er branches for 
the satellite range and terrestrial range are adjusted 
separately)

Adjustable pre-emphasis (steps of 2/4/6 dB) in the 
satellite range (each satellite branch is adjusted sepa-
rately) permits optimum pre-emphasis slope in the 
cascade

The power supply to the amplifi er units and the LNBs 
is provided by an integrated highly effi cient switched-
mode power supply unit

Due to the use of a highly effi cient DC/DC converter, 
the power consumption of the VWS 2990 is extremely 
low

Suitable for use in Kathrein Sat-IF distribution systems 
with 8 x Sat-IF (two satellite positions)

For indoor installation

Scope of Delivery

•  VWS 2900
•  Instructions for use

Intended Use

The VWS 2900 is used solely to amplify satellite and 
terrestrial signals in satellite reception systems.

Any use other than that specifi ed or failure to observe 
these application notes will invalidate the warranty or 
guarantee.

Sat IF Distribution System
Multi-switch Distribution Network Amplifi er

Transport and Storage

Transport and store the device in its original packaging.

Transport the device only in the permitted temperature 
range between -25 and +70 °C and store it in the range 
between –5 and +45 °C. Make sure there is no water 
condensation build-up.

VWS 2900

20510026

geeignet für DVB-T/T2

Summary of Contents for VWS 2900











Reviews: