21 of 32
7.2.4
Establishing Internet Connection
Tip
The receiver connects automatically to the internet as soon as a LAN cable is
connected to it. If no LAN cable is connected to the receiver, the WLAN icon
appears in the initial set-up.
It is not essential to establish an Internet connection during the initial set-up.
This can also be done subsequently via the Main Menu
1)
.
1)
see the instructions for use
Establishing Internet Connection Using LAN
1
2
1. Connect the LAN cable to the Ethernet
port of the receiver.
➯
The internet connection is estab-
lished automatically. After the con-
nection has been established, the
status
connected
is displayed under
the
Internet
icon (
①
in the figure on
the left).
➯
If it is not possible to establish an
internet connection, a warning tri-
angle with an exclamation mark is
displayed in the bottom right corner
of the submenu icon (as in
②
in the
figure on the left).
