15 of 32
Tip
Note the difference between a single-device system and a single-cable
system:
In classic satellite distribution (
single-
device system
), each receiver/participant is
connected to its own antenna cable.
Each twin receiver requires 2 antenna
cables (
The Tuner 2 type of
connection
must be set to
separate
.
If only one antenna cable is available, it
is connected only to the
LNB1 IN
.
The
Tuner 2 type of connection
must be set to
looped through
.
In the
single-cable system
, several receiv-
ers/participants are connected to a single
antenna cable Transmission channels are
used to allow each receiver/participant to
receive broadcast channels independently.
Single-cable system installed
must be set
to
Yes
.
SN:
MAC:
UHD Sat-Receiver
UFSconnect 926sw / 1000GB / CI+
BN: 20210236
SN:
MAC:
UHD Sat-Receiver
UFSconnect 926sw / 1000GB / CI+
BN: 20210236
Twin-Receiver
Twin-Receiver
SN:
MAC:
UHD Sat-Receiver
UFSconnect 926sw /
1000GB / CI+
BN: 20210236
SN:
MAC:
UHD Sat-Receiver
UFSconnect 926sw /
1000GB / CI+
BN: 20210236
1
2
Fig. 5: Single-device system
SN:
MAC:
UHD Sat-Receiver
UFSconnect 926sw / 1000GB / CI+
BN: 20210236
1
Twin-Receiver
SN:
MAC:
UHD Sat-Receiver
UFSconnect 926sw /
1000GB / CI+
BN: 20210236
Fig. 6: Single-cable system
