Kathrein UFSconnect 906 Operating Instructions Manual Download

Page: 96 / 176

96 from 176

You can fi nd an explanation of the individual editing options in this chapter.

Main Menu - Edit TV Channel list

13.6

Editing favourites lists

First select any desired programme from the favourites list that you wish to edit. After selecting

the channel(s) in a favourites list you want to edit, press the



button.

Fig.: Mainmenu - Edit channel list, Edit favourites

"Start Blockselection" only

appears if just one channel has
been selected for editing.

13.6.1 Move

See "13.5.1 Move" on page 92 in this chapter.

13.6.2

Removing from the Favourites list

Select with



"Remove from the favourites list" and confi rm with



The selected channels are deleted from the previously selected favourites list, but not from
the overall list.

13.6.3 Lock

See "13.5.4 Lock" on page 93 in this chapter.

13.6.4 Start

Blockselection

See "13.5.7 Start Blockselection" on page 95 in this chapter.

Summary of Contents for UFSconnect 906

















































































































































































Search results

Summary of Contents for UFSconnect 906

Reviews:

Related manuals for UFSconnect 906

Brands by name

Popular brands

Kathrein UFSconnect 906, Operating Instructions Manual

Search results

Summary of Contents for UFSconnect 906

Reviews:

Related manuals for UFSconnect 906

Brands by name

Popular brands