Kathrein UFSconnect 906 Operating Instructions Manual Download Page 69

Page: 69 / 176

69 from 176

7.5.1

Delete

Deleted recordings are irrevocably deleted and can only be restored by
re-recording the programme!

Select with



"Audio selection" and confi rm with



The selected recording(s) will be deleted.

7.5.2 Lock

Select with



"Audio selection" and confi rm with



. To activate the lock you must enter

your four-digit PIN code (factory setting: 0000).

Fig.: Recording archive - Editing recordings, Lock

The locked recording is displayed in the recording archive with a padlock on the left-hand side,
and in future can only be viewed by entering the four-digit PIN code (factory setting: 0000).

This function can be restored again using the edit menu (select: "Unlock").

Summary of Contents for UFSconnect 906

















































































































































































Search results

Summary of Contents for UFSconnect 906

Reviews:

Related manuals for UFSconnect 906

Brands by name

Popular brands

Kathrein UFSconnect 906, Operating Instructions Manual

Search results

Summary of Contents for UFSconnect 906

Reviews:

Related manuals for UFSconnect 906

Brands by name

Popular brands