29
Once you have reached the desired “East”/“West” border, switch to the respective
fi
eld “Set current
position for “****” border” and press the
button to con
fi
rm.
If you subsequently want to delete the set borders, switch to the “Reset border positions”
fi
eld and
press the
button to con
fi
rm deletion of the borders. You can then set new values for the borders.
Once you have set all the borders, press the
button.
Press the
(green) button to move to the next menu.
The following on-screen display appears:
LNB Type:
If your reception system does not have a Universal LNB, use the
buttons to select the LNB types
that are used in your reception system. You can choose from the following LNB types:
- Universal
or
- Simple
or
- User-de
fi
ned
LNB Frequency (MHz):
You only need to specify this data if your LNB type is not “Universal”. The data required differ between the
settings “simple” and “User-de
fi
ned”. On this aspect, also refer to the documentation supplied with your LNB.
- Selection “simple” LNB:
Use the number pad to enter the LNB frequency
- Selection
“User-de
fi
ned”:
To enter the required low, high and limit frequencies press the
button. The entry is made using the number pad
Connection and set-up
