14
Important instruction for
picture output using “YUV”:
The “YUV” output can be used
only if “RGB” is not selected as the output
signal for the TV Scart socket!
In this case, select “Y/C” or “CVBS” as the
output signal for the TV Scart socket.
“HDMI/YUV Resolution”. If for a programme that is
transmitted in the format 720 x 576 (standard TV)
the original format is to be transmitted to the TV
set, select the “On” setting. If the setting is “Off”,
the programme may be automatically scaled up to
the HDTV format 720p by the receiver.
Show 4:3 Event
Here you can select the type of screen display
mode for 4:3 broadcasts on a 16:9 TV set. Either
- Normal
(Pillarbox)
- Stretched (full screen) or
- Zoom in (Pan & Scan)
Audio Format via HDMI
Here you can select the type of audio signal that
is transmitted by the HDMI interface. Select the
signal that your TV set can process:
- Decoded PCM or
- SPDIF
format
Auto Dolby Digital Output
Here you can select whether the receiver
should automatically select the Dolby Digital
soundtrack (if this is transmitted).
TV Scart signal output
Select the type of video signal at the TV Scart
socket here. Select the signal that your TV set can
process.
- CVBS – composite video (Composite Video,
Blanking, and Sync) signal or
- RGB – Red/Green/Blue signal or
- Y/C – S-Video signal (luminance/chrominance)
TV-Scart-Output
Select the type of video signal at the VCR Scart
socket here. Select the signal that your external
recorder can process.
- CVBS – composite video (Composite Video,
Blanking and Sync) signal or
- Y/C – S-Video signal (luminance/chrominance)
Auto Dolby Digital Output
Here you can select whether the receiver should
automatically output the Dolby Digital signal
(if this is transmitted).
Connection and set-up
