89
Tuner 1 Setup
Installation Menu
Antenna Number:
Each tuner can receive from up to four satellites. Use the
buttons
to select the position to which you want to assign a new or different
satellite.
Satellite Name:
Press
to access the list of available satellites. Select the satellite
you want using the
buttons and confirm your selection with
.
Make sure your reception system is aligned to the selected satellite.
LNB Frequency:
Use the
buttons to select the LNB frequency applicable to
your reception system or press
to view the same listing as on first
installation, containing the most common variants as follows.
- Single (LNB Low frequency 9750 MHz)
- Dual (LNB Low frequency 9750 MHz + LNB High frequency 10600
MHz)
- Universal (LNB Low frequency 9750 MHz + LNB High frequency
10600 MHz + Limit frequency 11700 MHz)
Use the
buttons to make your selection. To confirm your selection
use the
buttons to select “OK” and press
.
22kHz Control:
Use the
buttons to make your selection (On/Off). The 22kHz
signal is needed to switch LNBs in multifeed reception and to switch
between Low and High band.
