5 / 14
1.4
Selecting the input symbol rate
Main menu
A
1236
MHz
TP
27.500
MS/s
3/4
QPSK
Outp.
S21
306.00
MHz
8
MHz
QAM64
!
Fine adjustments
can be made to the
output frequency
in the
output channel sub-menu
in 250 kHz steps.
Press the “Sub-menu” button
to activate the sub-menu; press the “Sub-menu” button
again to deactivate it.
Main menu (example for digit-by-digit setting)
A
1236
MHz
TP
27.
4
00
MS/s
3/4
QPSK
Outp.
S21
306.00
MHz
8
MHz
QAM64
!
The input symbol rate is selected using the “<” and “>” buttons.
The input symbol rate can be adjusted continuously from 2.0 MS/s to 45 MS/s (DVB-S) or 2.0 MS/s to 30 MS/s (DVB-S2) in 0.1 MS/s
steps using the “+” and “-” buttons.
The digits can also be entered individually to an accuracy of 0.001 MS/s:
• Press the “Change setting mode” button
(starts the mode)
• The
fi
rst digit
fl
ashes and can be input directly using the numeric pad on the keyboard
• After the
fi
rst digit has been input, the second
fl
ashes, and so on
• To make a correction, press the “Back” button to skip one place to the left
• After the last digit has been set, press the “Change setting mode” button
to end the mode.
Note:
The code rate (e.g. 3/4) is automatically determined once the channel unit has locked on to the set transponder.
1.5
Selecting output channel or output frequency
The output channel unit is selected using the “<” and “>” buttons.
Using the “+” and “-” buttons the output channel can be adjusted from 48 MHz to 96 MHz and from 114 MHz to 858 MHz in 7 or
8 MHz steps.
Main menu
A
1236
MHz
TP
27.500
MS/s
3/4
QPSK
Outp.
S21
306.00
MHz
8
MHz
QAM64
!
“Output channel” sub-menu
***
UFO331TP
***
Frequency
306.25
MHz
Level
0
Output
on
Summary of Contents for UFO 331/TP
Page 71: ......