Video recorder connection
Video recorder connection
The connection diagram provided at the end of this operating manual
and the description of the video recorder will show you how you
should connect your video recorder to the receiver.
Recording
In order to make a VCR recording, the satellite receiver must be
switched on or the timer must be pre-programmed (see section "Timer
settings“).
Playback
For VCR playback, the satellite receiver must be set to "standby" so
that the signal route is switched through from the VCR/AUX SCART
socket to the TV SCART socket.
You must set the SCART socket of the Sat receiver to "AUX" with the
T
button in order for your TV set to automatically play back the
picture of the video recorder.
In this setting, the picture of the video recorder is switched through to
the TV set during playback.
If you set "SAT" by pressing the
T
button, the Sat receiver will have
priority.
In the "TV" setting, the video signal of the TV set has priority.
65
Summary of Contents for UFD 515
Page 1: ...Operating manual Order no 20210009 ...
Page 2: ...2 ...
