9
CONNECTION AND SETUP
To enable you to utilise all the reception and recording properties of your UFC 861 twin-PVR cable receiver,
such as
1. recording one programme and at the same time viewing any other programme or zapping through the
channels, and
2. recording two different programmes at the same time,
the two tuner inputs of the receiver must each be supplied with the cable signal. Use the loop-through cable
supplied to connect the output of tuner 1 to the input of tuner 2.
If only tuner 1 is connected, with no connection to tuner 2, you have only the capabilities of a normal “single
receiver” available.
Loop-through cable
INFORMATION ABOUT ANTENNA CONNECTION AND “LOOP THROUGH”
OPERATION
Connect the satellite receiver (TV Scart socket) and the TV set using a Scart cable (see “Connection
Example”). If your TV has a stereo feature, you can receive the sound in stereo via the Scart connection.
Also connect the satellite receiver (VCR/AUX Scart socket) and the video recorder/DVR using a Scart cable.
For system reasons, the same video signals are to be found on the Scart outputs and on the video cinch
output.
If you wish to play the sound on your hi-fi system, connect the audio cinch sockets to the input sockets on
the hi-fi system with an appropriate cable (see “Connection Example”).
The fi bre-optic output is intended for the connection of a Dolby Digital system (see “Connection Example”).
TV AND VIDEO RECORDER CONNECTION
AUDIO CONNECTION
OPTICAL DIGITAL OUTPUT
If you are recording using an external video recorder, remember not to operate the
receiver during recording, otherwise all the on-screen displays will appear on your
recording.
