9
INSTALLATION AND CONNECTION
Before starting any installation work, it is essential you disconnect all the units con-
cerned from the mains. Risk of fatal injury due to electric shock!
•
Flat-bladed screwdriver for M5 screws
•
Cross-head screwdrivers for M3 and M5 screws
REQUIRED TOOLS AND EQUIPMENT
EXCHANGING THE CONTROL UNIT
Connection side (listing from the left):
1. F socket for connection to the turn-
table
2. F socket for connection to the UFS
940sw satellite receiver
3. Connection plug for the overall
power supply
4. Fuse (10 A) *
)
5. Connections for the power supply
to the turntable (the turntable must
not be powered via a separate
power supply unit!)
6. Connection socket for the control
cable from the turntable
*) The only fuse that may be
fi
tted is a 10 A
fl
at fuse supplied by Elschukom, with
the article number 162.6385.5102
or an equivalent replacement type.
Rear View
Plan view
VIEWS OF THE HDS 900 CONTROL UNIT
