6
When any of the above CAP units is upgraded by means of the HDS 910 upgrade kit,
no changes to the turntable and/or the BAS 60 are necessary! The existing cabling can
also still be used!
A BAS 50 planar antenna in use hitherto must be replaced with a BAS 60 (BN 216195)
(this applies only in connection with the CAP 100)!
PROPER USE
The HDS 910 upgrade kit is intended for upgrading the following Kathrein products:
Product
Current status
Status after upgrade
Ana-
logue
Digital
HDTV Recording
(USB)
Ana-
logue
Digital
HDTV Recording
(USB) *
)
CAP 100 **
)
x
-
-
-
x
x
x
CAP 200
x
-
-
-
x
x
x
CAP 210
x
-
-
-
x
x
x
CAP 300
x
-
-
-
x
x
x
CAP 301
x
-
-
-
x
x
x
CAP 310
x
-
-
-
x
x
x
The CAP units listed in the table are used for reception from satellites of digital TV and radio channels (prior
to the upgrade the CAP 100 can receive only analogue). The automatic positioner acts as a turntable for the
Kathrein BAS 60 antenna.
The turntable can be used to receive digital TV and radio signals in the frequency range from 10.70 to
12.75 GHz; the antenna cannot receive terrestrial signals (e.g. DVB-T).
After the upgrade, the turntable can be used only in conjunction with the UFS 940sw DVB-S receiver.
In conjunction with this receiver, the turntable provides fully automatic alignment of the BAS 60 to receive
digital satellite signals. The turntable is designed for use on stationary caravans or motor homes.
Any use other than that speci
fi
ed above will invalidate the warranty or guarantee.
PROPER USE (USE FOR THE INTENDED PURPOSE)
*
)
This function can be used only when an external USB storage medium (such as an external hard disk with
a USB connection
*)
) is connected and is formatted in the “FAT32” or “EXT2” format. The USB storage
medium that is connected may not have more than three partitions, since the receiver cannot manage
and use more than three partitions. Tested only with hard disks from the Kathrein product range (see also:
www.kathrein.de
→
Service
→
FAQs)
**
)
BAS 50 must be replaced with a BAS 60 (BN 216195)
