4
Important Safety Information
WARNING
The warranty claim will expire in case of damages resulting from the
non-observance of this manual.
We do not assume any liability for consequential damages.
We do not assume any liability for damages to persons and/or
material whatsoever which result from improper handling or
noncompliance with the safety instructions. The warranty claim
will expire in such cases!
The CO detector FCM 100 is equipped with a high-quality housing. However, please
observe the following safety instructions:
•
Do not open the housing of the FCM 100. Opening it is dangerous for you
and others and will result in the expiration of any warranty claims.
•
Operate the CO detector only with the provided batteries.
•
Handle the CO detector with care, heavy vibration or bumps may damage
the device.
•
Do not expose the CO detector to direct sunlight or strong heat, e.g.
heaters.
•
Do not install the CO detector close to strong electric power lines or
magnetic fields, as this may impair the transmission quality significantly.
•
Do not install the CO detector directly on iron or aluminium surfaces, as
this may impair the wireless transmission significantly. Use a non-
conducting material to insulate the device from the installation surface.
•
Do not install the CO detector in moist, very cold or very hot environments.
Please observe the maximum humidity and temperature limits (-10 °C to
+45 °C (14 °F to 113 °F), maximum 85% relative humidity).
•
Persons (including children) with limited physical, sensory or mental
abilities and/or lacking experience and/or knowledge must not use this
product.
•
Keep children away from the product and other connected electrical
appliances at all times. The CO detector includes small parts they can
swallow. Lay cables expertly so that they are neither bent nor otherwise
damaged. Install the CO detector out of children’s reach. Do not leave
packaging materials unattended, as they may be dangerous for playing
children.
•
Use a damp cloth to clean the CO detector’s surface, then dry it. Cleaning
agents will damage the surface.
