Installations-Menu
24
Searching for a New Channel using the Transponder Scan
1. Press the "Menu" button on your remote control.
2. Select the "Installation" menu and press "OK" to confirm.
3. Then select the "Scan" menu and again press "OK" to confirm.
4. Select the satellite using the Left and Right buttons.
5. Choose the "Frequency" option and press the "OK" button.
6. Press the blue "Add" button.
7. Key in the frequency, the polarity and the symbol rate.
8. Press the green button to store your settings.
9. Press "OK" again to confirm.
10. Set the "Network Search" option to "Off".
11. Press the green ("TP") button to start the transponder scan. Again
press "OK" to confirm.
12. The transponder is then scanned and the channels found are
appended to the
end
of the channel list.
13. Press the "Exit" button to quit the menu.
3)
Scan Mode
Select the scan: All or FTA (free-to-air channels only) - If you
scan for all channels, all channels will be stored, including the
encrypted ones; otherwise only the free-to-air channels are
stored.
