Kathrein Euroline UFE 335, Operating Manual

Page: 34 / 39

Menu structure
34
call up various information via your CA modules and Smartcards.
The amount and content of this information is determined by the CAM
or Smartcard, and does not come from the receiver. Please refer to
the instructions and documents from your service provider.
Reception of encrypted programmes
You can receive hundreds of encrypted programmes depending on
the satellite.
You have two possibilities to set the programmes from your service
provider.
a) Via satellite search
SEARCH: Start the automatic search by selecting „CA"
(= Search for encrypted programmes). You receive
all encrypted programmes of the selected satellite in
the „Favourite list“ menu under „New CA“ (see
favourite list).
COPY: The list in the “Favourite list“ menu in the right win-
dow is in alphabetical order. Select the programme
of your service provider with the [
► ] or [ ◄ ] button,
and copy the desired programmes in one
(or several) of your favourite lists by pressing [OK].
CLEAR OUT: If you have a lot of CA programmes in the pro-
gramme pool, which are not decoded by your CA
module, you can remove this “CA trash“ from the
programme pool.
Delete all ‚unused‘ programmes, all programmes which have not been
copied into one of the 10 favourite lists, with the [R] button in the
‚channel pool‘ menu.
b) Via transponder search
SETTING: Refer to the documents from your service provider
for the receiving parameters, and enter these into
the respective fields of the transponder search. After
starting the search by pressing the [OK] button, you
receive the appropriate programmes, which you can
save in the programme pool by pressing the [OK]
button.
In the case that the programmes are distributed on several
transponders, repeat this process again.
COPY: Select the „Favourite list“ menu and „New CA”
again, and copy the programmes of your service
provider into your favourite lists.
Here you can also remove the “CA trash” (see above)!