Functions of remote control
10
Functions of remote control
In standby, the receiver is switched on by pressing the red button or
the numerical buttons [0]-[9].
The [
◄
] [
►
] and [
▲
] [
▼
] buttons, which are arranged around the OK
button, possess the volume control function –/+ (Vol -/+) and the
programme selection function –/+ (Ch -/+) in normal operation.
Remote control command sets
The remote control can deal with two command sets. This enables the
parallel operation of two receivers independently in the same room
(not in connection with a twin receiver).
Note:
Programme one receiver to command set 1 and the second to com-
mand set 2. Use the mains switch to activate receiver 1 and to deacti-
vate receiver 2.
Keep the button
“RC”
pressed and then input the number “901” us-
ing the numbered keys.
In order to confirm the code and quit the remote control menu, press
“RC”
again. Then press “
“ to switch receiver 1 to standby and
deactivate the device using the mains switch.
Switch receiver 2 back on.
A description of the remote control
functions is integrated in the receiver’s
software. In order to call up these func-
tion descriptions, simply press the [
RC
]
button on the remote control and then
the button whose function is to be de-
scribed. The respective text is
displayed. Press the [RC] button once
more to exit the help menu.
Summary of Contents for Euroline UFE 335
Page 2: ......
Page 5: ...Contents 5 General 33 Reception of encrypted programmes 34 Glossary 35 Technical data 36 ...
Page 38: ......
