Operation
10
Operation
Programme selection
The receiver is factory pre-programmed with most of the common
satellites. In order to be able to receive properly, of course, you should
have aligned the antenna onto at least one of these satellites.
Press
SEL
in order to call up the list of the pre-programmed satellites.
Select a satellite, and press
OK
. The receiver now shows all the
programmes transmitted over this satellite.
There is no printed programme list included in the scope of delivery.
Select the desired programme using the / keys, and press
OK
.
Note:
Alternatively, you can call up the programme list of a satellite by
pressing
OK
immediately.
To choose a programme, enter its position using the number keys on
the remote control.
Press
TV/R
to change from the TV programme list to the radio
programme list, press
FAV
to call up a favourite list.
(4 lists).
Swap through these lists using either the
Quality/P
key, the
Recall/P+
key or the / keys. Press
EXIT
so that the lists disappear.
Summary of Contents for Euroline UFE 305/S
