Kathrein ARU4 Series, User Manual

Page: 87 / 122

87 of 122
14.4 LED
Not all readers support the functionality with 12 LEDs; all readers have at least 4 LEDs. Please check the
reader data sheet for information.
In this tab, it is possible to assign various functions to the 12 LED channels. It is possible to activate other parameters,
depending on the selected function.
Tip As supplied to customer, the first 4 LEDs are allocated to antennas 1–4, LED 5 is allocated to GSM, LED 6 to
KRAI, LED 11 and LED 12 to Bluetooth and Wi-Fi, respectively.
It is possible to customise this allocation.
2
3
1
4
5
6
7
8
9 10
Fig. 48: LED
཰
Live shows the changed LED colour in real time
ཱ
enters and shows RGB values
ི
Function
selects between the functions described in
Selecting Functions, p. 88
ཱི
First antenna the first antenna for the selected function
ུ
Last antenna the last antenna for the selected function
ཱུ
Turn-off time sets the time for how long LED is on for the selected function
ྲྀ
Brightness (live)
changes the LED brightness for all active LEDs (between 0 (auto brightness determined by the inte-
grated light sensor) and 100)
Ź
Move the brightness position along the bar to change the brightness of the LED.
ᇜ
The number at
ཷ
changes.
ཷ
changes the LED brightness (between 0 and 100)
Ź
Click + or – to change the brightness of the LED.
ླྀ
Get shows the current settings for all LEDs