Kathrein ALC Instructions For Use Manual Download Page 103

103 of 116

936.4720b

conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that 
refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. 
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2.  You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such 

modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a)  The modified work must itself be a software library.
b)  You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.
c)  You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
d)  If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other 

than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application 
does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. 
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. 
Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application 
does not supply it, the square root function must still compute square roots.) 
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be 
reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when 
you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, 
the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus 
to each and every part regardless of who wrote it. 
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the 
right to control the distribution of derivative or collective works based on the Library. 
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a 
storage or distribution medium does not bring the other work under the scope of this License.

3.  You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you 

must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this 
License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if 
you wish.) Do not make any other change in these notices. 
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent 
copies and derivative works made from that copy. 
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.

4.  You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of 

Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distrib-
uted under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. 
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code 
from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along 
with the object code.

5.  A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is 

called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this 
License. 
However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library (because it contains 
portions of the Library), rather than a “work that uses the library”. The executable is therefore covered by this License. Section 6 states terms for 
distribution of such executables. 
When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may be a derivative 
work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, 
or if the work is itself a library. The threshold for this to be true is not precisely defined by law. 
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines 
or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this 
object code plus portions of the Library will still fall under Section 6.) 
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables 
containing that work also fall under Section 6, whether or not they are linked directly with the Library itself.

6.  As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to produce a work containing 

portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the 
customer’s own use and reverse engineering for debugging such modifications. 
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this 
License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice 
for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things:
a)  Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were 

used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the 
complete machine-readable “work that uses the Library”, as object code and/or source code, so that the user can modify the Library and 
then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of 
definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.)

b)  Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library 

already present on the user’s computer system, rather than copying library functions into the executable, and (2) will operate properly with a 
modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work 
was made with.

c)  Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, 

for a charge no more than the cost of performing this distribution.

d)  If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified 

materials from the same place.

Summary of Contents for ALC





















































































































Reviews: