background image

WARNING: 

 

TO MINIMISE THE RISK OF ELECTRIC SHOCK, YOU MUST NOT EXPOSE THIS PRODUCT 

TO WET AND MOIST CONDITIONS AT ANY TIME. 

 

 

All KATHREIN Digital Systems GmbH products are lead-free and meet 

the requirements stated under the European Directive on the 

Restriction of Hazardous Substances (RoHS). This guarantees that 

the entire production process and the product itself are free of lead 

and of all listed hazardous substances. 

 

This product was tested and complies with the regularities for a class 

of  digital devices stated under FCC part 15. These limits were 

specified to provide reasonable protection against harmful exposure 

when operating  the device in a commercial environment. This 

product generates, uses and  may emit radio energy. It may in 

addition interfere with other radio  communication systems if not 

installed or used according to this manual.  Using the device in 

residential areas may cause disturbances to be possibly remedied at 

the user’s expense. 

 

Hereby KATHREIN Digital Systems GmbH declares that the keypad 

FKP 100  (order number  2220000007, EAN 4021121548840) is in 

conformity with the relevant provisions of Directive 1999/5/EG. 

 

 

Conformity: 

 

The declaration of conformity is available at http://www.kathrein-ds.com in 

the download section of the respective product. Alternatively, you can 

request the declaration of conformity directly from us: 

KATHREIN Digital Systems GmbH 

Anton-Kathrein-Str. 1–3 

83022 Rosenheim, Germany 

 

 

Summary of Contents for 2220000007













Reviews: