3 / 14
Main menu (front end not clicked into place)
A
1236
MHz
*
TP
27.500
MS/s
---
----
Outp.
S21
306.00
MHz
8
MHz
QAM64
!
1.
Con
fi
guration of the channel unit
1.1
Selecting the input socket
The
socket A or B
to be used for the input can be selected in the main menu for the system.
Main menu
A
1236
MHz
TP
27.500
MS/s
3/4
QPSK
Outp.
S21
306.00
MHz
8
MHz
QAM64
!
Main menu
A
1236
MHz
TP
27.500
MS/s
3/4
QPSK
Outp.
S21
306.00
MHz
8
MHz
QAM64
!
The
DiSEqC
TM
controller
for a matrix can be set in the
sub-menu
for the input socket that was selected.
Press the “Sub-menu” button
to activate the sub-menu; press the “Sub-menu” button
again to deactivate it.
“P”
Left from “TP”:
“P” indicates that the channel
fi
lter is activated and that some channels may be removed from the transport stream.
If the front end is not clicked into place (no Sat input signal), the following display appears:
The modulation type of the satellite input signal can be seen on the main menu display.
It is always
QPSK
in operating mode
DVB-S1
. Both
QPSK
and
8PSK
are available in
DVB-S2
mode.
Main menu (example for DVB-S1)
A
1236
MHz
TP
27.500
MS/s
3/4
QPSK
Outp.
S21
306.00
MHz
8
MHz
QAM64
!
Main menu (example of DVB-S2)
A
2122
MHz
TP
22.000
MS/s
2/3
8PSK
Outp.
S21
306.00
MHz
8
MHz
QAM64
!
The following settings are available:
A
or
B
1.2 DiSEqC
TM
setting
Sub-menu for channel unit I
***
UFO331TP
**
DiSEqC
off
Summary of Contents for 20610100
Page 71: ......
