CORDLESS LINE TRIMMER INSTRUCTION MANUAL
250MM/10” OR
300MM/12”
CUTTING SWATCH
SELECTION
1. PULL
2. ROATAE
0.
250MM/10” OR
300MM/12”
CUTTING SWATCH
SELECTION
1. PULL
2. ROATAE
0.
250MM/10” OR
300MM/12”
CUTTING SWATCH
SELECTION
1. PULL
2. ROATAE
0.
250MM/10” OR
300MM/12”
CUTTING SWATCH
SELECTION
1. PULL
2. ROATAE
0.
250MM/10” OR
300MM/12”
CUTTING SWATCH
SELECTION
1. PULL
2. ROATAE
0.
250MM/10” OR
300MM/12”
CUTTING SWATCH
SELECTION
1. PULL
2. ROATAE
0.
4
250MM/10” OR
300MM/12”
CUTTING SWATCH
SELECTION
1. PULL
2. ROATAE
0.
250MM/10” OR
300MM/12”
CUTTING SWATCH
SELECTION
1. PULL
2. ROATAE
0.
LINE TRIMMER BASICS
HOW TO ADJUST HANDLE
HOW TO ADJUST SHAFT LENGTH
1
1
2
2
3
3
1. Rotate the bottom half of the shaft
adjustment collar (4) in a clockwise
direction (towards the unlock icon)
to loosen the shaft.
1. Undo handle lock lever (10) to
release mechanism.
2. Extend telescopic shaft out to the
desired length.
2. Adjust handle to desired position,
the handle tilts, slides and rotates
for maximum comfort.
3. Re-tighten bottom half of the
shaft adjustment collar in an anti-
clockwise direction (towards the
lock position) for the unit to be
ready for use.
3. Once in the desired position,
re-tighten the handle lock lever.
250MM/10” OR
300MM/12”
CUTTING SWATCH
SELECTION
1. PULL
2. ROATAE
0.
250MM/10” OR
300MM/12”
CUTTING SWATCH
SELECTION
1. PULL
2. ROATAE
0.
220210
WARNING
REMOVE BATTERY BEFORE PERFORMING ANY ADJUSTMENTS
WARNING!
INSPECT THE AREA TO BE TRIMMED AND REMOVE ANY WIRE, CORD OR STRING-LIKE OBJECTS WHICH COULD BECOME ENTANGLED IN THE
ROTATING SPOOL & LINE.
WARNING!
ALWAYS USE BOTH HANDLES AT ALL TIMES.
WARNING!
KEEP PROPER FOOTING AND BALANCE AT ALL TIMES AND BE SURE OF PROPER FOOTING ON SLOPES.
WARNING!
DO NOT OPERATE THE TRIMMER ON A TREE, ON A LADDER, OR ON A SCAFFOLD. THIS IS EXTREMELY DANGEROUS.
CAUTION!
BYSTANDERS MUST KEEP A MINIMUM SAFE DISTANCE OF 10M AWAY FROM THE TRIMMER WHILE IT IS OPERATING. STONES, PIECES OF
METAL AND OTHER OBJECTS CAN BE THROWN OUT AT HIGH SPEED BY THE CUTTING LINE.
CAUTION!
DO NOT CUT GRASS WHEN WET.
CAUTION!
DO NOT BUMP THE HEAD ON ANY HARD SURFACES SUCH AS CONCRETE OR BRICK, THIS COULD CAUSE DAMAGE TO THE LINE TRIMMER.
