KEy COMPONENTS
IMPORTaNT NOTES
1. In order to be purified, water must pass through the ViruPur Cartridge. The
flow rate is slower than an ordinary sports water bottle in order to ensure
complete purification.
2. Squeeze and sip using continuous pressure. Do not pump. You will notice
a 2– 4 seconds pause after squeezing, like using a long straw, before
water flows.
3. Always hold bottle upright when drinking. Water will not pass through the
cartridge if bottle is upside down or at an angle.
PRODuCT SET-uP
(Before First Use)
1. Rinse inside of bottle
2. assemble the cartridge
Attach the ViruPur Cartridge to the bottom of the Carbon Postfilter. Gently
twist each component while pushing it on. Make sure ALL O-rings and
components are fully sealed and assembled. Firmly twist and push the
Carbon Filter into the bottle cap (Figure 2).
Figure 1
Bottle
Straw
Cushioned
mouth piece
Bottle cap with
integral carry loop
Carbon Postfilter
ViruPur Cartridge with
integrated glass-fiber
Prefilter and removable
plastic sleeve
EN
